Appearance & Behavior

The settings in this view let you control the use of color in your sky charts, and set some preferred behaviors for the app.

Chart Color & Brightness

These options let you control the appearance of your sky charts.

Color Chart: Displays stars, planets, and other objects in the sky chart using full color.

Monochrome Chart: Displays stars, planets, and other objects in the sky chart using grayscale, with light objects on a dark background.

Inverse Monochrome Chart: Displays stars, planets, and other objects in the sky chart using grayscale, with dark objects on a light background. This makes the sky chart appear as a photographic negative, and may make it easier to see for those with poor vision.

Screen Brightness: Sets the brightness level of the screen. Turning this down, especially when using the Night Vision theme, may help preserve your visual dark adaptation, as well as save battery life.

When using the Night Vision theme, the sky chart is always drawn with red objects on a dark background (or dark objects on a red background, if you're using Inverse Monochrome sky charts). Again, this is to preserve your night vision - red light affects your dark adaptation much less than white light.

Behavior

These options are only found in the iOS version of SkySafari. Android SkySafari users will find the equivalent options under the Appearance section, below.

Ambient Sound: Controls the use of ambient sound in the app. Tapping the entry will display a sound picker where you can choose from several ambient sounds or none at all. You can add you own custom ambient sounds to the list. On iOS, place them in the Documents directory using iTunes file sharing. On Android, add them to the app's Sounds directory.

Sound Effects: Controls the use of sound in the app. When turned on, SkySafari plays sounds in response to events such as selecting a new object, connecting to a telescope, and so on. When turned off, SkySafari does not play sounds.

Tilt to Use Compass: When turned on, you can tilt your iPhone, iPad, or Android device upward to activate the compass. Once activated this way, touch the screen anywhere to turn the compass off. Turn "Tilt to Use" off if you find that you're accidentally activating the compass too often, or if you prefer to activate it from the main toolbar.

Please Note: the compass will be turned off if you connect to a telescope, or lock on the telescope's position in the sky chart. The sky chart cannot be centered on the telescope's position, and centered on the coordinates reported by the compass, at the same time. See the Scope Control view Help page for more information.

If your device does not have a compass, this option is disabled. When the compass has been activated, the coordinate system will change to Horizon coordinates (see above).

Show Coordinates & FOV: When turned on, the chart center coordinates and field of view are always displayed at the top of the sky chart. You can turn them off if you want to see the sky chart without any coordinates superimposed.

Chart Animations: Provides animated panning to objects that you select and center in the sky chart. If turned off, the chart jumps instantly to objects when you center them. Also provides smoother panning. When turned on, the chart "glides to a halt" when you remove your finger after swiping. When turned off, the chart stops moving instantly when you remove your finger. Please Note: this feature is only available in the SkySafari Plus and Pro.

Show FPS: Displays frames per second as you're swiping or animating the chart (FPS = 1.0 by default when the app is sitting idle.) Please Note: this feature is only available in the SkySafari Plus and Pro.

Prevent Sleep: When turned ON, this prevents the device from sleeping while SkySafari is active. This allows a continuous connection to a telescope. Please Note: this feature is only available in the SkySafari Plus and Pro.

Redden Keyboard in Night Vision: When turned ON, SkySafari reddens the keyboard when displayed in Night Vision mode. Normally this is desired but you may want to turn this OFF when using a custom keyboard that is already reddened or when using a red film over the screen.

Toolbar Icon Order: Lets you rearrange the items on the main sky chart toolbar. Tap this item to show the list of toolbar items. Tap and drag the "grip" on the right side of an item in the list to rearrange it. Tap Done when finished. Please Note: this feature is only available in SkySafari Plus and Pro for iOS. It's not available in the Android version.

Screen Rotation

These options let you control what happens when you rotate your device from portrait to landscape mode or vice-versa.

Allow Auto Rotation: When turned on, the main sky chart and other views automatically rotate as you turn your device from portrait to landscape mode. When turned off, all views stay in portrait mode, regardless of how you are holding your device. Note, this feature is not included on Android.

On the iPad, this setting overrides the hardware rotation lock. In other words, if the auto rotation setting is turned off, all of SkySafari's views will remain in portrait mode even if the iPad's hardware rotation lock is disabled. You may want to have other iPad apps auto-rotate, but keep SkySafari in portrait orientation.

Toolbar in Landscape: When turned on, the main toolbar and status bar appear when your device is held in Landscape mode, as well as in Portrait mode. If this setting is turned off, the toolbar will disappear in Landscape mode, giving you a "full screen" sky chart view.

Notifications

SkySafari can notify you about satellite events and planet risings. These notifications are generated for next 24 hour period each time SkySafari is brought to the foreground. If you go for a day or so without using SkySafari, the notifications will stop.

Planet risings: When turned on, SkySafari will notify you of Sun, Moon and planet risings.

Bright Satellites and Flares: When turned on, SkySafari will notify you when the International Space Station (ISS), the Tiangong Space Station, or the Hubble Space Telescope (HST) is rising for a visible pass. It will also notify you when an Iridium satellite is about to flare.

Do Not Disturb: When turned on, no notifications will be delivered during the specified time period.

Please Note: Iridium flares are only shown in the SkySafari Plus and Pro.